Polaris msx 110 Service Manual

MAINTENANCE
2.192004 Four Stroke PWC Service Manual
Exhaust Cooling Injector Maintenance
The exhaust pipe rubber hoses and muffler are cooled by injecting a small amount of water injected through an orifice
from the freshwater cooling system into the exhaust stream. The orifice should be inspected and cleaned periodically
to ensure proper cooling of the exhaust muffler and connector hoses. Be sure hoses are not restricted (kinked or
collapsed internally).
CAUTION:
1. Loosen clamp connecting hose to fitting and remove
hose.
2. Inspect and clean orifice.
3. Reinstall cooling hose.
Throttle Cable Adjustment
The throttle cable connects the throttle flipper with the Pedal
Position Unit (PPU). The cable is located underneath the
steering helm.
1. Turn adjuster clockwise to loosen the throttle flipper
freeplay. Turn counter--clockwise to tighten flipper
freeplay.
NOTE: V erify throttle cable is not kinked after per-
forming procedure.
FRESHWATER INJECTOR
.185″
FRESHWATER INJECTOR
Lock Nut
Adjuster
Throttle Cable

Polaris msx 110 Specifications

General

Brand	Polaris
Model	msx 110
Category	Boat
Language	English