R
Replenishing Battery Fluid, 2.16
ReverseCableAdjustment,2.7,7.17
Reverse System Assembly, 7.13
Routings
Air Inlet Hoses, 5.3
Bilge Siphon Hoses, 7.4
Fuel Hoses, 5.4
Reverse Cable, 7.3
Steering Cable, 7.3
Ve n t H o s e, 5 . 5
RPM Limiting Modes / RPMs, 5.35
S
Sacrificial Anode, 6.20
Safety Warning Guidelines, 1.5
Seat Assembly, 7.9
Shroud and Storage Assemblies, 7.8
Spark Plug, 2.18
Special Service Tools, 1.14–1.15
Special tools, Engine, 4.7
Specifications
Engine, 4.1–4.2
Engine Fasteners, 4.3–4.6
Standard To rque Specifications, 1.10
Starter Assembly, 8. 17
Starter Motor Cleaning, 8.16
Starter Solenoid B ench Test, 8.17
Starter Motor Disassembly and Assembly,
8.14–8.18
Stator Assembly, 6.14
Stator Assembly Exploded View, 6.5
Stator Disassembly, 6.12–6.14
SteeringCableAdjustment,2.7,7.17
Steering Cable Installation, 7.16
Steering Cable Removal and Installation, 7.15–7.16
Steering Control Assembly, 7.10
Steering Post Removal and Installation, 2.6
System Interface Box, 8.11
Diagnostics Mode, 8.11
T
Tap Drill Sizes, 1.13
Throttle Cable Adjustment, 2.19
Trouble Codes
Boost / Air Temp. Sensor, 5.20
Camshaft Position Sensor, 5.24
ECU / Engine Management System, 5.29
Engine Coolant Temp. Sensor, 5.22
Engine Speed Sensor, 5.23
ETB / Electronic Throttle Body, 5.15
Fuel Injectors, 5.17
Fuel Pump Driver, 5.27
Ignition Coils, 5.18
Intake Manifold Pressure Sensor, 5.21
Knock Sensor, 5.25
O2 / Lambda Sensor, 5.19
PPU / Pedal Position Unit, 5.16
Wastegate Solenoid, 5.26
Troubleshooting
Charge Air C ooler, 5. 34
Engine Turns Over; Will Not Start, 5.37
Engine Will Not Turn Over, 5.36
Engine Lacks Performance / RPM Limits,
5.40–5.43
Engine Stall; W ill Not Re---Start, 5.39
Engine Stalls; Will Re---Start, 5.38
ETB / PPU, 5.30
Turbocharger / Wastegate Overview, 5.32–5.33
V
Valve C learance Adjustment Procedure, 2.8–2.9
Ventilation Troubleshooting, 6.3
W
Wiring Diagram
Charging System, 8.9
NGI Gauge MIL Indicators, 8.4
Start / Stop System, 8.10
System Interface Box, 8.12
To Next Page
Loading...
Need help?
General