4.10
FUEL SYSTEM
9923983 - 2012-2013 RZR 170 Service Manual
© Copyright 2012 Polaris Sales Inc.
Fuel Tank Removal
See Chapter 5 for seat and panel removal required to
access the fuel tank. The following components will have
to be removed:
•Seats
• Console panel
• Seat shield panel
1. Completely drain fuel from fuel tank. Be sure the fuel
valve is set to “RES” to get the majority of the fuel
drained from the tank.
2. Remove the main (M) and reserve (R) fuel pickup
hoses from the pickup assembly. Mark the hoses to
aid assembly.
3. Remove the two tank straps by removing the four
fasteners securing them to the frame.
Front Strap Fasteners
4. Rear Strap Fasteners
5. To reinstall the tank, reverse the removal procedure.
Be sure to torque the tank mounting strap bolts.
6. Finish the installation process by installing the seat
shield panel, console panel, and seats. See Chapter
5.
Fuel Tank Mounting Strap Bolt Torque
17 ft-lbs (23 Nm)
To Next Page
Loading...
Need help?
General
