Polaris RANGER RZR 170 Service Manual

5.6
BODY / SUSPENSION / STEERING
9923983 - 2012-2013 RZR 170 Service Manual
© Copyright 2012 Polaris Sales Inc.
Rocker Panel Removal
1. Remove the (3) bolts from each side, retaining the
lower portion of the rocker panels.
2. Remove the (3) push rivets from each side, retaining
the upper portion of the rocker panels.
3. Remove the (3) fasteners from each side, retaining
the rocker panels to the front cab.
4. Remove the (4) fasteners from each side, retaining
the rocker panels to the rear side panels.
5. If removing the RH rocker panel, remove the screw
retaining the fuel valve knob and the (2) screws
retaining the fuel valve to the rocker panel.
Rear Bumper Removal / Installation
1. Remove the push rivet from each side of the rear
bumper.
2. Remove the (6) screws retaining the rear bumper to
the frame.
3. Reverse this procedure to reinstall the rear bumper.
Tighten all fasteners securely.
Rear Cab Removal
1. Remove the driver and passenger seats from the
vehicle (see “Seat Removal”).
2. Remove the (4) fasteners retaining the front of the rear
cab to the frame.
3. Remove the (2) fasteners retaining the top portion of
the rear cab to the frame.
4. Remove the (2) push rivets from each side, retaining
the rear side panels to the rear cab.
5. Remove the (4) fasteners from each side, retaining
the rear side panels to the rocker panels.
6. Remove the (8) remaining fasteners retaining the rear
cab and rear bumper to the frame.
7. Remove the rear cab from the vehicle as an assembly.
8. Reverse this procedure to reinstall the rear cab.
Tighten all fasteners securely.
= T
Body Component Fasteners:
16 in-lbs (1.8 Nm)

Polaris RANGER RZR 170 Specifications

General

Brand	Polaris
Model	RANGER RZR 170
Category	Utility Vehicle
Language	English