10
9926816 R07 - 2014-2016 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
10.3
BODY ASSEMBLY VIEWS
CAB FRAME ASSEMBLY XP
NOTE
Finger tighten all components until cab frame is completely assembled on vehicle then tighten to specification.
1. Install hip bolster and secure the bottom mount with M8 x 1.24 x 20 bolts. Torque bolts to 14 ft-lb (19 Nm).
2. Install ROPS to hip bolster and frame with M10 x 1.25 x 55 bolts and nuts. Tighten fasteners to 40 ft-lb (54 Nm)
3. Install the front ROPS to the frame with M10 x 1.5 x 45 screws and nuts. Install front ROPS to ROPS hoop with
M10 x 1.5 x 20 screws. Torque fasteners to 40 ft-lb (54 Nm).
4. Install rear ROPS to the ROPS hoop with M10 x 1.5 x 25 screws. Install rear ROPS to frame with M10 x 1.5 x 45
screws and nuts. Torque fasteners to 40 ft-lb (54 Nm).
5. Install visor on front ROPS with M10 x 1.25 x 20 bolts. Torque bolts to 8 ft-lb (11 Nm)
q
Cab Frame Fasteners 40 ft-lb (54 Nm)
r
Visor Screws 8 ft-lb (11 Nm)
w
Cab Frame Extenders
t
Front ROPS Bracket 40 ft-lb (54 Nm)
e
Hip Bolster Lower Fasteners 14 ft-lb (19 Nm)
y
Hip Bolster
BODY / FRAME
To Next Page
Loading...
Need help?
General
