Cameras
Topics:
▪ Adjust a Camera
▪ Turn Your Camera Off
▪ Turn Your Camera On
▪ Turn Camera Tracking On
▪ Turn Camera Tracking Off
You can use cameras in a variety of ways.
Some tasks, depending upon the camera type, include the following:
▪ Select a camera to control at your site or at a remote site.
▪ Zoom in, zoom out, pan, or tilt the camera.
▪ Turn tracking on or off.
▪ Turn your camera on or off.
▪ Select, save, and delete presets. Use the presets to move a camera.
Note: If camera tracking is on, camera control and preset features are unavailable. Turn tracking off to
access them.
Near: The camera at your site.
Far: The camera at another site in a call.
Adjust a Camera
To enhance the view of meeting participants, you can make adjustments to a camera.
Procedure
1. Select Menu .
2. Select Camera .
3. Select Control .
4. Optional: In a call, you can select Switch to move the camera from Near to Far.
If there’s a controllable far camera available, you can select it. After you select a camera, pan, tilt,
and zoom controls display (if available).
5. Press or tap + to zoom in or - to zoom out. Press or tap the arrows to tilt up or down, or to pan left
or right.
6. To exit the control screen, select Back.
Polycom, Inc. 31
To Next Page
Loading...
Need help?
General
