Polycom VSX Series User Manual

Customizing the VSX System
4 - 45
Setting Date, Time, and Location
You can update the system with regional settings, including the
location-specific language and calling parameters.
To set the date, time, and location:
1. Go to System > Admin Settings > General Settings > Location.
2. Configure these settings:
3. Select and configure these settings:
Setting Description
Country Specifies the country where the system is located.
Changing the country automatically adjusts the country code
associated with your system number.
Language Sets the language for the user interface.
Country Code Specifies the country code for the system location.
Area Code
Required
Specifies if an area code is required to place ISDN calls in
the specified country.
ISDN International
Access
Specifies the international code required for placing ISDN
calls from the system location to another country.
Room Telephone
Number
Indicates the telephone number of the room where the
system is located.
Setting Description
Date Format and
Time Format
Specifies your format preference for the date and time display
and lets you enter your local date and time.
Display Time in
Call
Specifies the time display in a call:
• Elapsed Time – Displays the amount of time in the call.
•Local Time – Displays the local time on the screen during
a call.
•Off – Time is not displayed.

Polycom VSX Series Specifications

General

Brand	Polycom
Model	VSX Series
Category	Conference System
Language	English