Appendix - 1
Appendix
This appendix provides the following technical details about the VSX system:
• Video Source Output Examples for Multiple Displays
• Multipoint Dialing Speed Information
• Port Usage
• Actions that Cause the System to Restart
• Q.850 Cause Codes
• PathNavigator Error Codes
Video Source Output Examples for Multiple Monitors
The f
The following tables show how the monitor settings on your VSX system can
affect what you see on your displays. You can configure the video sources for
your displays in many ways; these tables show only a few typical
configurations that are available on certain systems for point-to-point calls.
Keep in mind that what you see on your displays can also be affected by
multipoint display modes, dual monitor emulation, PIP settings, and so on.
For more information about configuring video sources for each display, refer
to the Monitor 1 and Monitor 2 video source settings described on page 4-10.
To Next Page
Loading...
Need help?
General
