Administrator’s Guide for the VSX Series
7 - 28
Stereo audio comes from
the wrong speaker.
VSX 7000, VSX 7000s,
VSX 7000e, VSX 8000:
Microphones are incorrectly
identified in the system.
Swap the microphones on the Admin Settings >
Audio Settings screen.
Speakers are connected
incorrectly.
Connect the speaker on the left to the system’s white
audio output connector, and the speaker on the right
to the red audio output connector.
Video and audio are not
synchronized.
The video quality for the
camera in use is set for
Sharpness. This setting is
for images with no motion.
Go to System > Admin Settings > Cameras >
> > Video Quality.
Change the Camera setting to Motion.
The
SoundStation VTX 1000
conference phone controls
do not adjust volume in
video calls.
This is normal. Use the VSX system remote control to adjust the
system in video calls.
The Audio Meter screen
shows a reading for
Polycom Mic but no
microphone is connected -
the system receives local
audio from a mixer.
Echo cancellation is in use.
The system displays the
audio line input level in this
case.
This is normal.
Symptom Problem Corrective action
To Next Page
Loading...
Need help?
General
