Matrix User Guide
RINS915-2 Page: 41
5.14 Adjusting the Proximity Volume
The following procedure should be followed to adjust the volume of a proximity card reader connected to your
system
Icon Keypad LED Keypad
Enter Y
Enter the proximity reader number ( - V), to
choose which proximity reader to adjust.
If the proximity reader is not available to you then you
will hear an error tone.
Use the > and ? keys to adjust the volume
The proximity reader will emit a sound to help you
adjust the volume.
Press the key to accept the new setting.
Use the
and
keys to navigate to “PROXIMITY
VOL”. The following display will be shown:
Press to select this option.
The following display will be shown:
Enter a number 1 to 4 for the number of the proximity
reader to be adjusted.
If the reader cannot be found an error tone sounds
and you will be returned to the main menu.
The following display will be shown:
Use the
key or the G key to increase and
decrease the volume respectively.
The following display will now be shown indicating the
volume level:
Press to store the new volume setting.
An acceptance tone will be heard and you will be
returned to the main menu.
To Next Page
Loading...
Need help?
General
