Matrix User Guide
Page 50 RINS915-2
7.2.2 Disarming the Panel
Present a pre-programmed card or tag to the MX-Prox reader for 1 second (wait until the proximity reader
beeps).
The operation LED will turn off indicating that you are in arm/disarm mode.
Remove the card to disarm the panel.
7.3 Multi-Partition Operation
The MX PROX has four status LEDs. In multi partition operation these four LEDs display the partition number,
1,2,3 or 4.
PROXIMITY READER
Operation
STATUS LEDS
PARTITION 4 (ORANGE LED)
PARTITION 3 (GREEN LED)
PARTITION 2 (YELLOW LED)
Partition 1 (Red LED)
7.3.1 Arming the Panel
Present a pre-programmed card or tag to the MX-Prox reader for a pre-determined time period (each second is
indicated with a beep).
The operation LED will turn off indicating that you are in arm/disarm mode.
Presenting the card for 1 second will select partition 1 (RED LED illuminates).
Presenting the card for 2 seconds will select partition 2 (YELLOW LED illuminates).
Presenting the card for 3 seconds will select partition 3 (GREEN LED illuminates).
Presenting the card for 4 seconds will select partition 4 (ORANGE LED illuminates).
(This cycle will repeat a number of times or until you remove the card from the reader)
Remove the card to start arming the currently selected partition.
The partition will start arming in arm mode A and a high tone counting the exit time will be emitted.
Repeat to arm more partitions.
Presenting the card
Presenting the card
To Next Page
Loading...
Need help?
General
