Matrix User Guide
Page 44 RINS915-2
5.17 Performing an NVM reset on a Keyfob
Perform this NVM reset if you want to delete the key fob from all systems. This NVM reset
will reset the key fob back to factory settings.
1. Remove the battery from the key fob.
2. Press and hold the UNLOCK and LOCK buttons together.
3. Insert the battery, taking care to use the correct battery orientation.
4. After 2 seconds the GREEN and RED LED will toggle indicating that the Expander
settings have been reset.
5. Release the UNLOCK and LOCK buttons. The GREEN and RED LED will stop
flashing and the AMBER LED will flash indicating that the key fob is automatically
trying to learn itself onto another expander.
6. Remove the battery from the key fob.
LOCK
Button
UNLOCK
Button
To Next Page
Loading...
Need help?
General
