Qlogic QConvergeConsole 2400 Series User Manual

A–Troubleshooting
How to Change the Default Port Reference Using the QConvergeConsole Shortcut
A-4 SN0054669-00 C
4. In the Target field, change the port number 8080 to the port number set in
file server.xml. Port number 6789 is used in this example.
The Properties dialog should appear as follows:
Figure A-2. QCC GUI Shortcut Properties with New Port Number
5. Click Apply to save the change, and then click OK to close the Properties
dialog.

Qlogic QConvergeConsole 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole 2400 Series
Category	Network Accessory
Language	English