Qlogic SANbox 1400 Series User Manual

A – Command Line Interface
Ps Command
59226-00 B A-29
A
Ps Command
Displays current system process information.
Authority None
Syntax ps
Examples The following is an example of the Ps command:
SANbox #> ps
PID PPID %CPU TIME ELAPSED COMMAND
338 327 0.0 00:00:00 3-01:18:35 cns
339 327 0.0 00:00:01 3-01:18:35 ens
340 327 0.0 00:00:21 3-01:18:35 dlog
341 327 0.1 00:05:35 3-01:18:35 ds
342 327 0.2 00:11:29 3-01:18:35 mgmtApp
343 327 0.0 00:00:04 3-01:18:35 fc2
344 327 0.0 00:02:16 3-01:18:35 nserver
345 327 0.0 00:02:44 3-01:18:35 mserver
346 327 0.8 00:35:12 3-01:18:35 util
347 327 0.0 00:00:29 3-01:18:35 snmpservicepath
348 327 0.0 00:02:46 3-01:18:34 eport
349 327 0.0 00:00:21 3-01:18:34 PortApp
350 327 5.6 04:08:24 3-01:18:34 port_mon
351 327 0.0 00:01:38 3-01:18:34 zoning
352 327 0.0 00:00:01 3-01:18:34 diagApp
404 327 0.0 00:00:04 3-01:18:27 snmpd
405 327 0.0 00:00:02 3-01:18:27 snmpmain
406 405 0.0 00:00:00 3-01:18:26 snmpmain

Qlogic SANbox 1400 Series Specifications

General

Brand	Qlogic
Model	SANbox 1400 Series
Category	Switch
Language	English