2 – Using SANsurfer Switch Manager
Using the Topology Display
59226-00 B 2-29
A
2.12.3
Topology Data Windows
The topology display provides the following data windows corresponding to the
data window tabs:
Devices – displays information about devices (hosts and storage targets)
connected to the switch. Refer to “Devices Data Window” on page 3-15 for
more information.
Active Zoneset – displays the active zone set for the fabric including zones
and their member ports. Refer to “Active Zone Set Data Window” on
page 3-16 for more information about this data window. Refer to “Zoning a
Fabric” on page 3-20 for information about zone sets and zones.
Switch – displays current network and switch configuration data for the
selected switches. Refer to “Switch Data Window” on page 4-8 for more
information.
Link – displays information about the inter-switch links. Refer to “Link Data
Window” on page 3-17 to for more information.
To Next Page
Loading...
Need help?
General
