A – Command Line Interface
Show Config Command
59226-00 B A-77
A
Show Config Command
Displays switch, port, alarm threshold, and zoning for the current configuration.
Authority None
Syntax show config
port [port_number]
switch
threshold
zoning
Keywords port [port_number]
Displays configuration parameters for the port number given by [port_number].
Ports are numbered beginning with 0. If [port_number] is omitted, all ports are
specified.
switch
Displays configuration parameters for the switch.
threshold
Displays alarm threshold parameters for the switch.
zoning
Displays zoning configuration parameters for the switch.
To Next Page
Loading...
Need help?
General
