EasyManuals Logo
Home>Qlogic>Switch>SANbox 1400 Series

Qlogic SANbox 1400 Series User Manual

Qlogic SANbox 1400 Series
278 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
3 – Managing Fabrics
Fabric Security
3-2 59226-00 B
S
3.1.2
Fabric Services
Fabric services security includes SNMP and In-band management. Simple
Network Management Protocol (SNMP) is the protocol governing network
management and monitoring of network devices. SNMP security consists of a
read community string and a write community string, that are basically the
passwords that control read and write access to the switch. The read community
string ("public") and write community string ("private") are set at the factory to
these well-known defaults and should be changed if SNMP is enabled using the
SNMP Properties dialog. If SNMP is enabled (default) and the read and write
community strings have not been changed from their defaults, you risk unwanted
access to the switch. Refer to “Enabling SNMP Configuration” on page 3-2 for
more information. SNMP is enabled by default.
In-band management is the ability to manage switches across inter-switch links
using SANsurfer Switch Manager, SNMP, management server, or the application
programming interface. The switch comes from the factory with in-band
management enabled. If you disable in-band management on a particular switch,
you can no longer communicate with that switch by means other than a direct
Ethernet or serial connection. Refer to “Enabling In-band Management” on
page 3-2 for more information.
3.1.2.1
Enabling SNMP Configuration
To enable SNMP configuration, do the following:
1. On the faceplate display, open the Switch menu and select SNMP
Properties to open the SNMP Properties dialog.
2. In the SNMP Configuration area, place a check mark in the SNMP Enabled
check box.
3. Click the OK button to save the change to the database.
3.1.2.2
Enabling In-band Management
To enable In-band Management, do the following:
1. On the faceplate display, open the Switch menu and select Switch
Properties to open the Switch Properties dialog.
2. Click the In-band Management Enable button.
3. Click the OK button to save the change to the database.

Table of Contents

Other manuals for Qlogic SANbox 1400 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Qlogic SANbox 1400 Series and is the answer not in the manual?

Qlogic SANbox 1400 Series Specifications

General IconGeneral
BrandQlogic
ModelSANbox 1400 Series
CategorySwitch
LanguageEnglish

Related product manuals