2 – Using QuickTools
Opening QuickTools
2-2 59235-02 A
L
2.2
Opening QuickTools
After the switch is operational, open the QuickTools web applet by entering the
switch IP address in an Internet browser. If your workstation does not have the
Java 2 Run Time Environment program, you will be prompted to download it. The
Add a New Fabric dialog shown in Figure 2-1 prompts you for your username and
password. Click the Add Fabric button to open the fabric.
Figure 2-1. Add a New Fabric Dialog
The opening window is displayed, as shown in Figure 2-3. For security reasons,
you will be prompted to change your user account password that was initially set
up by the administrator, as shown in Figure 2-2. You will be prompted to change
the password each time you attempt to open the fabric until you change the
default password. Click the OK button, and change the user account password.
Refer to ”Managing User Accounts” on page 4-8 for more information.
Internet Browser
Microsoft® Internet Explorer® 5.0 and later
Netscape® Navigator® 6.0 and later
Mozilla™ 1.5 and later
Firefox® 1.0 and later
Safari® 1.0 and later
Java 2 Standard Edition Runtime Environment 1.4.2 to support
the web applet
Table 2-1. Workstation Requirements
To Next Page
Loading...
Need help?
General
