Quantum FIREBALL PLUS AS 10.2 User Manual

Installation
3-2 Quantum Fireball Plus AS 10.2/20.5/30.0/40.0/60.0 GB AT
3.2
3.23.2
3.2 UNPACKING INSTRUCTIONS
UNPACKING INSTRUCTIONS UNPACKING INSTRUCTIONS
UNPACKING INSTRUCTIONS
1. Open the shipping container and remove the packing assembly that
contains the drive.
2. Remove the drive from the packing assembly.
3. When you are ready to install the drive, remove it from the ESD bag.
Figure 3-2 shows the packing assembly for a single Quantum Fireball Plus AS
hard disk drive. A 20-pack shipping container is available for multiple drive
shipments.
Figure 3-2
Figure 3-2 Figure 3-2
Figure 3-2
Drive Packing Assembly
CAUTION:
CAUTION:CAUTION:
CAUTION: The maximum limits for physical shock can be exceeded if the
drive is not handled properly. Special care should be
taken not to bump or drop the drive. It is highly recommended
that Quantum Fireball Plus AS drives are not stacked or placed
on any hard surface after they are unpacked. Such handling
could cause media damage.
CAUTION:
CAUTION:CAUTION:
CAUTION: During shipment and handling, the antistatic electrostatic dis-
charge (ESD) bag prevents electronic component
damage due to electrostatic discharge. To avoid accidental dam-
age to the drive, do not use a sharp instrument to open the ESD
bag and do not touch PCB components. Save the packing mate-
rials for possible future use.

Quantum FIREBALL PLUS AS 10.2 Specifications

General

Brand	Quantum
Model	FIREBALL PLUS AS 10.2
Category	Storage
Language	English