Quantum LTO-8 HH SAS User Manual

Chapter 2: Introduction
Speed Matching
16 QuantumLTO-8 HH SAS User’s Guide
Speed Matching
To improve system performance, the drive uses a technique called speed
matching to dynamically adjust its native (uncompressed) data rate to
the slower data rate of a server. With speed matching, the drive
operates at different speeds when reading or writing the Ultrium 7.
Native data rates are as follows in the table below.
Table 2 Performance
Parameters
If the server's net (compressed) data rate is between two of the
preceding native data rates, the drive calculates the appropriate data
rate at which to operate. Speed matching dramatically reduces
backhitch, the condition that occurs when a tape stops, reverses, and
Ultrium Generation Media
Generation 8
Medi
a
Generation 7
Medi
a
Speed matching data
rates (MB/sec)
365.0 300.0
341.0 287.52
318.0 268.56
306.4 250.66
273.0 231.86
249.5 213.06
226.0 194.26
203.0 175.46
180.0 157.67
157.5 138.52
135.0 120.11
112.0 101.46

Quantum LTO-8 HH SAS Specifications

General

Brand	Quantum
Model	LTO-8 HH SAS
Category	Storage
Language	English