Chapter 5: Media
Environmental and Shipping Specifications for Tape Cartridges
QuantumLTO-8 HH SAS User’s Guide 81
Examples of Cartridge
Problems
Example: Split Cartridge Case
The cartridge's case is damaged. There is a high possibility of media
damage and potential loss. Perform the following steps:
1 Look for cartridge mishandling.
2 Use the Quantum Leader Pin Reattachment Kit (part number
08
L9129) to correctly seat the pin. Then, immediately use data
recovery procedures to minimize chances of data loss.
3 Review media-handling procedures.
Environmental and Shipping Specifications for Tape
Cartridges
Before you use a tape cartridge, acclimate it to the operating
environment to prevent condensation in the drive (the time will vary,
depending on the environmental extremes to which the cartridge was
exposed).
The best storage container for the cartridges (u
ntil they are opened) is
the original shipping container. The plastic wrapping prevents dirt from
accumulating on the cartridges and partially protects them from
humidity changes.
When you ship a cartridge, place it in
its jewel case or in a sealed,
moisture-proof bag to protect it from moisture, contaminants, and
physical damage. Ship the cartridge in a shipping container that has
enough packing material to cushion the cartridge and prevent it from
moving within the container.
Tab l e
8 on page 82 gives the environment for operating, storing, and
shipping LTO Ultrium Tape Cartridges.
To Next Page
Loading...
Need help?
General