6.1. User log in
The users of a balance AS/X series can have their specific access code to the balance’s
menu. The password system is determined by balance’s administrator, i.e. a user of the
higher order in relation to the other balance users. The access password can comprise up
to 6 digits.
Balance software enables determining:
• A single Administrator, who has access to all balance settings and software
functions, including changing the password of the administrator and other users.
• A single User who is authorized to access balance settings and functions, as set
by the balance administrator
Setting passwords and access levels
• Remember, that after the first entering the password settings (see parameter P9
13 Password protection), the user should set a password for the balance
Administrator.
• The software requires inserting an administrator password when entering
parameter P9 13 Password protection only if the administrator password is other
than “0”.
• On the following entering this parameter, the software will require inserting the
administrator’s password. Access to parameter settings of submenu P9 13
Password protection will be granted only on entering correct password.
Unless the password is correct, the balance displays a message on incorrect
password and goes back to displaying previous screen.
• Depending on the settings, the inserted password is previewed either as
a sequence of digits or as asterisks (the initial value of each entered digit is
always = 0).
Following the point 5.1.1 menu P9 Other contains the following options
Fig. 9. Password – function activating
To Next Page
Loading...
Need help?
General
