22. CONNECING SCHEME OF EXTERNAL BUTTONS
A balance AS/X series enables connecting external buttons for tarring or printing
measurement results without the need to touch balance’s keyboard with operator’s hands.
The buttons are connected using a dedicated splitter connected to balance’s RS 232
interface.
Additionally the splitter enables connecting a printer or a computer.
The splitter and buttons are additional equipment (optional) of a balance AS/X series.
23. LIST OF COMMANDS COMPUTER - BALANCE
Function INTERFACE RESET
Command R CR LF (zeroing currently carried out commands, restoring factory default
settings)
Function SEND ALL IMPLEMENTED COMMANDS
Command PC CR LF (sends information on all commands implemented in the
balance’s software)
Function SEND MEASUREMENT RESULT IN BASIC MEASURING UNIT
Command S CR LF (sends result in basic measuring unit on stabilization of indication)
Function IMMEDIATELY SEND MEASUREMENT RESULT IN BASIC MEASURING
UNIT
Command SI CR LF
Function SEND MEASUREMENT RESULT IN CURRENT MEASURING UNIT
Command SU CR LF sends result in current measuring unit on stabilization of
indication)
Function IMMEDIATELY SEND MEASUREMENT RESULT IN CURRENT
MEASURING UNIT
Command SUI CR LF
Function ZERO BALANCE
Command Z CR LF (zeroing of indication on stabilization)
Function IMMEDIATELY ZERO BALANCE
Command ZI CR LF
Function TARE WHEN STABLE
Command T CR LF
Function IMMEDIATELY TARE BALANCE
Command TI CR LF
To Next Page
Loading...
Need help?
General
