16.3. Filling (dosing)
Filling (dosing) mode is intended for precise measuring or adding a product until reaching a
pre-defined target value. Before the beginning of a measuring cycle the user should set a
target mass, which is simultaneous the HI dosing threshold.
Mode activating
Fig. 41. Filling – mode activating
Display content
Fig. 42. Filling – display content
1 – mass to be placed on the weighing pan to reach a pre-defined target value
2 – bargraph
3 – working mode name
4 – TR (target) the value of target mass which is declared in mode parameters
(see Fig. 38. M3 01 Target mass)
5 – WGH mass currently placed on balance’s weighing pan
To Next Page
Loading...
Need help?
General
