R&S FPC Series User Manual

Remote Control
R&S
®
FPC
272User Manual 1178.4130.02 ─ 07
Suffix:
<n>
.
irrelevant
<m> irrelevant
Example: //Turn off all delta markers
CALC:DELT:AOFF
Usage: Event
Manual operation: See "All Markers Off" on page 376
See "All Markers Off" on page 385
See "All Markers Off" on page 395
See "All Markers Off" on page 403
CALCulate<n>:DELTamarker<m>:MAXimum:NEXT
This command moves a delta marker to the next higher trace maximum.
If the delta marker is not active yet, the command also turns on that delta marker.
Suffix:
<n>
.
irrelevant
<m> Marker
Example: //Move delta marker 2 to the next higher value
CALC:DELT2:MAX:NEXT
Usage: Event
Manual operation: See "Set To Next Peak" on page 376
See "Set To Next Peak" on page 386
See "Set To Next Peak" on page 404
CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK]
This command positions a delta marker on the current trace maximum.
If the delta marker is not active yet, the command also turns on that delta marker.
Suffix:
<n>
.
irrelevant
<m> Marker
Example: //Move delta marker 3 to the peak level
CALC:DELT3:MAX
Usage: Event
Manual operation: See "Set To Peak" on page 376
See "Set To Peak" on page 386
See "Set To Peak" on page 404
Remote Commands of the Spectrum Application

R&S FPC Series Specifications

General

Brand	R&S
Model	FPC Series
Category	Measuring Instruments
Language	English