Name: Raymarine SportPilot
Brand: Raymarine
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Chapter 4: Installing the SportPilot 39

4 Installing the SportPilot

4.5 Connecting SeaTalk equipment

You can use the SportPilot’s dedicated SeaTalk port to connect it to

SeaTalk instruments or autopilot control units. The SportPilot can

then share SeaTalk data with the instruments. It can also provide them

with power if required.

Raymarine produce a range of SeaTalk cables you can use to connect

the SportPilot to SeaTalk instruments:

• flat moulded plugs are used on recent SeaTalk instruments

(e.g. ST30, ST40 and ST60)

• round plugs are used on older SeaTalk instruments (e.g. ST50)

Conversion cables - flat moulded plug to round plug

Extension cables - flat moulded plugs at each end

D5554-1

Part no. Type Length

D187 Flat moulded plug to male round plug 0.15 m (6 in)

D188 Flat moulded plug to female round plug 0.3 m (12 in)

Interface cables - flat moulded/round plug to bare ends

Part no. Type Length

D229 Flat moulded plug to bare ends 1 m (3 ft 3 in)

D179 Male round plug to bare ends 3 m (9 ft 10 in)

D181 Female round plug to bare ends 3 m (9 ft 10 in)

Part no. Type Length

D284 Flat moulded plugs at each end 1 m (3 ft 3 in)

D285 Flat moulded plugs at each end 3 m (9 ft 10 in)

D286 Flat moulded plugs at each end 5 m (16 ft 5 in)

D287 Flat moulded plugs at each end 9 m (29 ft 6 in)

D288 Flat moulded plugs at each end 20 m (65 ft 6 in)

Extension cables - round plugs at each end

Part no. Type Length

D124 Male round plug to female round plug 1 m (3 ft 3 in)

D125 Male round plug to female round plug 3 m (9 ft 10 in)

D126 Male round plug to female round plug 6 m (19 ft 8 in)

D154 Male round plug to female round plug 9 m (29 ft 6 in)

Raymarine SportPilot User Manual

Other manuals for Raymarine SportPilot