5
2 Door & Operator Hardware
2.1 Delivery of Operator
Upon delivery of your Raynor trolley operator, inspect the unit immediately for any shipping damages. Verify that you
have received all the hardware parts pertaining to your operator model, as listed in Table 2 and shown in
Figure 2. If ordered, other items such as radio controls or other types of optional equipment may be present. If any
item is missing or if there is evidence of damage, call customer service.
2.2 Hardware Supplied
Table 2 - Standard Hardware Parts Supplied
No Qty Description
Raynor
Part #
1 1
3-Push-button station
(open/close/stop)
22150
2 1 Door lifting arm assembly 6131337
3 2 Pre-drilled galvanized track
(1)
8' Track 4110551
10' Track 4110552
12' Track 4110553
14' Track 4110554
4 1 #410 (48) Drive chain
(1)
7160072
5 1 Front end u-bracket 6131338
6 1 #410 (48) Front idle assembly 6131339
7 2-3 Spacer
(2)
6131340
8 1 Carriage
6131330
9 6 Hex bolt 3/8-16 x 1-1/4”
4021331
10 1 Hex bolt 3/8-16 x 2-1/4”
11 1 Take-up bolt 3/8-16 x 2-1/2”
12 1 Connecting chain link
13 8 Hex nut 3/8-16
14 7 Helical spring lock washer 3/8
15 1 Lock nut 3/8-16
16 1 Entrapment Warning Placard 6031349
NOTE: Install the Entrapment Warning Placard (shown in Figure 3), next to the control station, visible in the area of
the door.
For technical support, please call 1-800-4-Raynor (1-800-472-9667) or visit www.raynor.com
(1) Length according to door height
(2) For a door height up to 12', 2 spacers are required/provided. For a door
height of 14', 3 spacers are required/provided.
Note: Depending on door height, the quantity of track hardware
may vary.
17
Figure 3 - Entrapment Warning Placard
Figure 2 - Standard Trolley Hardware
16
To Next Page
Loading...
Need help?
General
