Raynor ControlHoist CMT User Manual

9
For technical support, please call 1-800-4-Raynor (1-800-472-9667) or visit www.raynor.com
Position and hang the operator
5
Attach door arm
Attach door arm to carriage.
Carriage
Lock nut 3/8-16
Bolt 3/8-16 x 2-1/4
Lock nut 3/8-16
Door arm
Bolt 3/8-16 x 1-1/4
Door Side
Nut 3/8-16
6
Bolt 3/8-16 x 1
Door bracket
Lock washer 3/8
Attach door arm to door using appropriate fasteners.
Mount door bracket to the center of the door.
Door arm should ideally hang vertically when the door is
closed.
Lock washer 3/8
Track
Tracks
(front end)
Secure the operator using hanging brackets and appropriate
fasteners. It is highly recommended to secure the tracks.
The number and type of supports used is left up to the
discretion of the installer based on the environmental
constraint. Intermediate trolley rail hang is recommended for
door heights over 10 feet.
Hoist the rear of the operator to a horizontal
position. Temporarily secure with rope or chain.
Tighten wall bracket bolts and nuts.
Hanging brackets (example)
Operator
Side

Raynor ControlHoist CMT Specifications

General

Brand	Raynor
Model	ControlHoist CMT
Category	Door Opening System
Language	English