16
ATOM linear encoder system
RTLF / RKLF scale applicator
Suitable for:
• RTLF tape scale, any length
• RKLF narrow tape scale, any length
Required parts:
• Appropriate length of scale (see ‘RTLF installation drawing’ on page 11
or ‘RKLF installation drawing’ on page 12)
• End clamp kit, RKLF only (A-9523-4015)
• RGG-2 two part epoxy adhesive, RKLF only (A-9531-0342)
• Datum clamp, RTLF only (A-9585-0028)
• Loctite 435, RTLF only (P-AD03-0012)
• Appropriate cleaning solvents (see ‘Storage and handling’ on page 8)
• Readhead mounting bracket (see table below)
• Appropriate scale applicator (see table below)
• 2 × applicator mounting screws
• 2 × M2 × 6 screws, top mount applicator only
Optional parts:
• End cover kit, RTLF only (A-9585-0035)
• Renishaw scale wipes (A-9523-4040)
• Lint-free cloth
• Reference mark deselection stickers (A-9402-0049 for a sheet of 20)
• Loctite 435 dispensing tip (P-TL50-0209)
Slim applicator Side mount applicator Top mount applicator
Mounting
In place of the
readheadbracket
In place of the readhead bracket In place of the readhead
Applicable
bracket
Side mounting bracket
(A-9401-0103)
Customer-designed bracket
‘L’ mounting bracket
(A-9402-0037)
Customer-designed bracket
‘L’ mounting bracket
(A-9402-0037)
Customer-designed bracket
RTLF
A-9402-0060 A-9402-0034 A-9402-0028
RKLF
A-6547-1947 A-6547-1943 A-6547-1939
Readhead mounting bracket and scale applicator:
There are different versions of the applicator depending upon the scale and design of the readhead mounting bracket.
For more information on designing your bracket, contact your local Renishaw representative.
To Next Page
Loading...
Need help?
General
