Rheem IKONIC RTGH-SR84i User Manual

IKONIC Tankless Water Heater Service Manual
18
USER INTERFACE AND OPTIONS
STATUS -->Tankless Status
• Tankless Mode
• Flow Rate
• Inlet Temp
• Outlet Temp
• HX Temp
• Exhaust Temp
• Water Valve Opening (%)
• Fan Speed (Actual)
• Set Fan Speed
• Flame Rod Status
• Burner Stage Status
STATUS -->WiFi Status
• WiFi Device Status
• WiFi Setup
• WiFi Software Version
• WiFi Module Software
• MAC Address
• WiFi Signal Strength (dB)
• SSID
• IP Address
• SubNet Mask
• Gateway
SERVICE
• Current Alarms
• Alarm History
• Software Version
• Heater Software Version
• Burner Staging
• Lifetime ON Hours
• Lifetime Water Used
• Total Pump Hours
• Total Pump Cycles
• Lifetime Gas Usage (kBTU)
• Successful Ignitions
• Failed Ignitions
• Flame Failures
• Bypass Ratio
• Max Input Rate (kCal/h)
• Flush Heater
• WH Model
• Manifold Rotate
• Reset Defaults
• Service Alert
• WiFi Reset
QUICK LOOK MODE
Press and hold the “STATUS” Button for 5 seconds to
access Quick Look Mode. Water Inlet Temperature, Wa-
ter Outlet Temperature and Flow Rate values will be dis-
played on the screen sequentially.
To exit, press “BACK” button.
MENU OPTIONS

Rheem IKONIC RTGH-SR84i Specifications

General

Brand	Rheem
Model	IKONIC RTGH-SR84i
Category	Water Heater
Language	English