Rheem IKONIC RTGH-SR84i User Manual

IKONIC Tankless Water Heater Service Manual
24
USER INTERFACE AND OPTIONS
TEMPERATURE DISPLAY BEEP ON ALARM
1. Press the “SETTINGS” button.
2. Press the “▼” or “▲” button until “Temp Display” is
displayed, and press “ENTER” button.
3. The factory setting is “Fahrenheit”. Press the “▼” or
“▲” button to select “Fahrenheit” or “Celsius”, and
press “ENTER” to conrm. To exit this setting, press
“BACK” button until the initial screen is displayed.
1. Press the “SETTINGS” button.
2. Press “▼” or “▲” button until “Beep On Alarm” is dis-
played, and press “ENTER” button to conrm.
3. The Factory setting is “NO”. Press the “▼” or “▲”
button to select “NO” and “YES”, and press “ENTER”
to conrm. To exit this setting, press “BACK” button
until the Home screen is displayed.
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Temp Display
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Fahrenheit
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Beep On Alarm
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Temp Display
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Fahrenheit
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Yes
SETTINGS
BACK ENTER
STATUS SERVICE MODE SETTINGS
BACK ENTER
STATUS SERVICE MODE
Tankless ConfigSET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SETTINGS
BACK ENTER
STATUS SERVICE MODE
None
SETTINGS
BACK ENTER
STATUS SERVICE MODE
OFF
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Recirc.Pump Mode
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE SETTINGS
BACK ENTER
STATUS SERVICE MODE
Tankless ConfigSET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SETTINGS
BACK ENTER
STATUS SERVICE MODE
None
SETTINGS
BACK ENTER
STATUS SERVICE MODE
OFF
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Recirc.Pump Mode
SET POINT

Rheem IKONIC RTGH-SR84i Specifications

General

Brand	Rheem
Model	IKONIC RTGH-SR84i
Category	Water Heater
Language	English