IKONIC Tankless Water Heater Service Manual
31
SERVICE MENU
This tankless water heater can set several operations and display all service information of this water heater with the
Liquid Crystal Display (LCD) on the User Interface.
USER INTERFACE AND OPTIONS
SERVICE
CURRENT ALARMS:
Check and clear the current alarms
MANIFOLD ROTATE
(only if Manifold is active):
Set to rotate the manager unit in a
manifold system
RESET DEFAULT?:
Factory reset of the setting
SERVICE ALERTS:
Set operation time to trigger T111
service alert
WIFI RESET:
Reset WiFi
Return to "CURRENT ALARMS"
ALARM HISTORY:
Check and clear the previously
observed alarms
SOFTWARE VERSION:
Software version of the user inter-
face on the water heater
TOTAL PUMP HOURS:
Total accumulated recirculation
pump operation hours
MAX INPUT RATE:
Rated input rate for the water
heater
FLUSH HEATER:
Set to ON when performing flush
on the water heater
WH model:
Water heater model
TOTAL PUMP CYCLES:
Total accumulated ON/OFF cycles
of the recirculation pump
LIFETIME GAS:
Total accumulated energy con-
sumption (KBTU)
SUCCESS IGNITION:
Total accumulated successful
ignitions
FAILED IGNITION:
Total accumulated failed ignitions
FLAME FAILURES:
Total accumulated flame failures
after successful detection of flame
BYPASS RATIO:
Current bypass ratio
HTR. SOFTWARE VERSION:
Software version of PCB on the
water heater
BURNER STAGING:
Only seen and used when convert-
ing fuel type.
LIFETIME ON HRS:
Total accumulated powered On
hours of the water heater
LIFETIME WATER:
Total accumulated water
consumption (GPM)
THE ITEM TO SET ITEMS
THE ITEMS TO VIEW SERVICE INFORMATION
To Next Page
Loading...
Need help?
General
