Rheem IKONIC RTGH-SR84i User Manual

IKONIC Tankless Water Heater Service Manual
23
USER INTERFACE AND OPTIONS
SET POINT TEMPERATURE
1. Press the “SETTINGS” button.
2. Scroll thru the menu to select “SET POINT”, to enter
the set point mode press “ENTER” button, which is
the right most button.
3. Now press the “▼” or “▲” button in the center of
the display to increase or decrease the temperature.
Temperature can be changed in increments of 1°F.
Temperature range is 85°F-140°F (29°C-60°C).
4. Once temperature is set to the desired value, press
“ENTER” button, right most button to store value. To
exit this setting, press “BACK” button until the Home
screen is displayed.
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
120
°F
SETTINGS
BACK ENTER
STATUS SERVICE MODE
120
°F
SETTINGS
BACK ENTER
STATUS SERVICE MODE
115
°F
Press button
to access
“SETTINGS”
Menus
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
120
°F
SETTINGS
BACK ENTER
STATUS SERVICE MODE
120
°F
SETTINGS
BACK ENTER
STATUS SERVICE MODE
115
°F
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
120
°F
SETTINGS
BACK ENTER
STATUS SERVICE MODE
120
°F
SETTINGS
BACK ENTER
STATUS SERVICE MODE
115
°F
Center buttons
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
120
°F
SETTINGS
BACK ENTER
STATUS SERVICE MODE
120
°F
SETTINGS
BACK ENTER
STATUS SERVICE MODE
115
°F

Rheem IKONIC RTGH-SR84i Specifications

General

Brand	Rheem
Model	IKONIC RTGH-SR84i
Category	Water Heater
Language	English