Rheem IKONIC RTGH-SR84i User Manual

IKONIC Tankless Water Heater Service Manual
33
VIEWING CURRENT ALARMS
This water heater can display up to 4 active alarms. Us-
ers may clear these alarms on the user interface by com-
pleting the following steps.
1. Press the “SERVICE” button
2. Press the “▼” or “▲” button until “Current Alarms” is
displayed, and press “ENTER” to conrm.
3. Press the “▼” or “▲” button and the LCD displays
current alarm 1 to 4.
CLEARING THE CURRENT ALARMS
1. Redo from above step.2, and press the “▼” or “▲”
button until “Clear Alarms?” is displayed. Press “EN-
TER” to conrm.
2. Press the “▼” or “▲” button until “Yes” is displayed,
and press the “ENTER” To exit this setting, press
“BACK” until the initial screen is displayed.
ALARM HISTORY
This water heater can display up to 6 previously observed
alarms. Users may clear these alarms on the user inter-
face by completing the following steps:
1. Press the “SERVICE” button.
2. Press the “▼” or “▲” button until “Alarm History” is
displayed. Press “ENTER” to conrm.
3. Press the “▼” or “▲” button, the LCD displays previ-
ously observed alarm 1 to 6.
USER INTERFACE AND OPTIONS
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Current Alarms
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Clear Alarms?
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Yes
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Alarm History
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Current Alarms
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Clear Alarms?
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Yes
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Current Alarms
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Clear Alarms?
SETTINGS
BACK ENTER
STATUS SERVICE MODE
Yes

Rheem IKONIC RTGH-SR84i Specifications

General

Brand	Rheem
Model	IKONIC RTGH-SR84i
Category	Water Heater
Language	English