• Be sure to remove printed OHP transparencies one by one as they are delivered. This prevents them
sticking together.
1. Press the [User Tools/Counter] key on the control panel.
2. Press the [ ] or [ ] key to select [System Settings], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Tray Paper Settings], and then press the [OK] key.
4. Press the [ ] or [ ] key to select [Paper Type:Bypass Tray], and then press the [OK] key.
5. Press the [ ] or [ ] key to select the proper items, according to the paper type you want to
set.
19
To Next Page
Loading...
Need help?
General
