Printing on Orientation-Fixed or Two-Sided
Paper
This section explains how to print on paper whose orientation and printing side are unchangeable
(letterhead paper, for example).
Use the settings and paper orientations shown below to ensure the machine prints onto orientation-fixed
paper (such as letterhead or continuous stationery) correctly. Specify [Auto Detect] or [On (Always)] for
[Letterhead Setting] in the printer settings, and then place the original and paper as shown below. For
details about the letterhead print settings, see "System".
Paper Orientation
Paper Trays 1-4 Multi Bypass tray
Letterhead Setting
[On(Always)]
Letterhead Setting
[Off]
Letterhead Setting
[On(Always)]
Letterhead Setting
[Off]
1-sided print
2-sided print
1-sided print
2-sided print
• You cannot perform 2-sided (duplex) printing on paper fed from the multi bypass tray.
• To print on letterhead paper when [Letterhead Setting] is set to [Auto], you must specify [Letterhead]
as the paper type in the RPCS printer driver's settings.
3. Print Functions Available for This Machine
82
To Next Page
Loading...
Need help?
General
