Setting [Data security for copying] in the printer driver
• Select the [Data security for copying] check box. You can also enter the text in the [Text:] box.
• You cannot select the [Mask type:] check box at the same time.
• To print a document protected by gray overprint, the machine must be set up correctly. Consult
your administrator.
Printing a document using [Data security for copying]
1. The pattern and text you have set is printed.
2. The document is copied or stored in copiers/multifunction machines which the optional Copy
Data Security unit is installed.
3. The document is blanked by gray overprint.
• When printing a document that is set with [Data security for copying], the machine does not require
the optional Copy Data Security unit to be installed. The Copy Data Security unit is required when
copying or storing a document protected by gray overprint.
• Only the RPCS printer driver is supported.
• Printing at 200×200 dpi is not possible.
• You cannot partially embed a pattern and text in a document.
• To make the embedded pattern clear, set the character size at least 50 pt (preferably 70 to 80 pt)
and character angle to between 30 and 40 degrees.
• Use 182×257 mm (7
1
/
4
×10
1
/
2
in.) or larger paper.
• Use ordinary or recycled paper of at least 70% whiteness.
• Duplex printing may interfere with this function as a result of text and patterns being visible through
the paper.
3. Print Functions Available for This Machine
72
To Next Page
Loading...
Need help?
General
