Printing GL/2 and TIFF Files
112
4
❖ Margin Adjustment
Specify the inside margin around the originals (0 to 100 mm in 1 mm incre-
ments).
❖ Extraction
Specify whether to uncompress and extract compressed job data before print-
ing it. Selecting this option reduces print errors due to corrupted archives, but
slows the print process slightly.
❖ Mirror Image
Prints images with left and right reversed.
❖ Positive / Negative
Prints images with black and white inverted.
❖ Dithering
Select a dither pattern appropriate for the print image.
Note
❒ If you select [Auto], [DTP], or [Photograph] for this setting, the image is print-
ed using [Photograph].
❖ Original Ratio Fine Adjustment: Horizontal
Adjusts the horizontal size difference between original data and printed im-
age for scaled drawings that must be accurately printed. The ratio range is
99.0-101.0%, which you can adjust in increments of 0.01%.
❖ Original Ratio Fine Adjustment: Vertical
Adjusts the vertical size difference between original data and printed image
for scaled drawings that must be accurately printed. The ratio range is 99.0-
101.0%, which you can adjust in increments of 0.01%.
❖ Paper Folding
If the folding finisher is installed, select a paper folding method.
To Next Page
Loading...
Need help?
General
