Using the HDI Driver for AutoCAD
117
4
Installing the HDI Driver
The following explains how to install the HDI driver under Windows 2000. All
the procedures are the same for Windows 95/98/Me, Windows XP, Windows
Server 2003, and Windows NT 4.0.
Important
❒ AutoCAD applications must be installed before you install the HDI driver.
❒ This section explains installation using AutoCAD 2007.
❒ Quit all applications currently running before beginning the HDI driver in-
stallation.
A Insert the CD-ROM into the CD-ROM drive.
The installer starts.
B On the [Start] menu, point to [Settings], and then click [Control Panel].
C Double-click [Autodesk Plotter Manager].
[Autodesk Plotter Manager] appears only if there is the AutoCAD 2000 series ap-
plication already installed.
D Double-click [Add-A-Plotter Wizard].
E Click [Next >].
F Click [Next >].
G Click [Have Disk].
H Select [CD-ROM] in [My Computer].
Check that the CD-ROM provided with the machine is shown.
I Double-click [DRIVERS], and then double-click [HDI].
J Click the file that matches the AutoCAD application you want to use.
AC2000: AutoCAD 2000/AutoCAD LT2000
AC2000i: AutoCAD 2000i/AutoCAD LT2000i
AC2002: AutoCAD 2002/AutoCAD LT2002
AC2004: AutoCAD 2004/AutoCAD LT2004/AutoCAD 2005/
AutoCAD LT2005/AutoCAD 2006/AutoCAD LT2006
AC2007: AutoCAD 2007/AutoCAD LT2007
Check the driver you selected matches the AutoCAD version you want to use.
If they do not match, an error screen appears. See the HDI driver's Readme if
this occurs.
To Next Page
Loading...
Need help?
General
