141
7. Appendix
Specifications
This section contains the machine's electrical and hardware specifications, in-
cluding information about its options.
*1
This machine can print HP-GL, HP-GL/2, TIFF, and CALS files.
Note
❒ When using Mac OS, use only the standard USB Interface. The optional USB
interface board is not supported.
❒ When using the USB Interface (Standard) with Mac OS X 10.3.3, USB2.0 is
supported.
❒ When using the USB Interface (Standard) with Windows Me, install USB
Printing Support. Windows Me only supports USB 1.1 speed.
Component Specifications
Resolution 300 × 300, 600 × 600 dpi
Printing speed Type 1: 4 ppm
Type 2: 6 ppm
(A1L, plain paper)
Printing speeds depend on the machine. Check which
type of machine you have. See General Settings Guide.
Interface Standard:
• Ethernet interface (100BASE-TX / 10BASE-T)
• USB 2.0 interface
Option:
• Gigabit ethernet interface (1000BASE-T)
• IEEE 802.11b wireless LAN interface
Network protocol IPv4, IPv6, IPX/SPX, AppleTalk
Printer language
RPCS, PostScript 3, PDF Direct, GL/2 & TIFF Filter
*1
Fonts PostScript 3: 136 fonts (Type 2:24, Type 14:112)
Memory 1 GB
Hard disk Storage capacity: 80 GB
Network cable 100BASE-TX / 10BASE-T shielded twisted-pair (STP,
Category/Type5) cable.
USB interface (Standard) • Supported Operating System:
Windows Me / 2000 / XP, Windows Server 2003,
Mac OS 9.2.2, Mac OS X 10.3.3 or later
• Transmission spec.
USB 2.0 Standard
• Connectable Device:
Devices corresponding to USB 2.0 Standard
To Next Page
Loading...
Need help?
General
