Guide to Functions of the Machine's External
Options (mainly North America)
1. Staple Unit
You can attach the staple unit to stapling the output paper.
2. Lower paper trays
You can attach up to three lower paper trays.
There are two types of trays, each holding up to 250 or 500 sheets of paper.
These trays can be used in any combination.
A customer engineer may be required to install this, depending on the number of levels being installed.
Contact your authorized service representative. For details, see "Attaching the Paper Feed Unit", Setup.
3. Caster Table
A table with casters to place this machine.
4. Handset
Used as a receiver.
Allows you to use the On Hook Dial and Manual Dial functions. It also allows you to use the machine as a
telephone.
1. Getting Started
38
To Next Page
Loading...
Need help?
General
