Ricoh IM 350 User Manual

Placing Originals
Placing Originals on the Exposure Glass
• Keep your hands away from the hinges and exposure glass when lowering the ADF. Not doing
so may result in an injury if your hands or fingers are pinched.
• Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or be damaged.
1. Lift the ADF.
2. Place the original face down on the exposure glass. The original should be aligned to the
positioning mark
A
.
Start with the first page to be scanned.
DVL359
A
3. Lower the ADF.
Left original beeper
The beeper sounds and an error message is displayed when you leave your originals on the
exposure glass after scanning.
The machine repeats 5 long beeps four times.
You can change the beeper setting under [Sound of Less Urgent Level] in the Screen Features
menu. For details, see "Screen Features", Settings.
Placing Originals in the Auto Document Feeder
Be sure not to load the original untidily. Doing so may cause the machine to display a paper misfeed
message. Also, be sure not to place originals or other objects on the top cover. Doing so may cause a
malfunction.
Placing Originals
95

Ricoh IM 350 Specifications

General

Print Resolution	1200 x 1200 dpi
Maximum Paper Size	A4
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Memory	2 GB
Paper Output Capacity	250 sheets
Supported Paper Sizes	A4, A5, A6, B5, B6
Mobile Printing Support	Yes
Copy Resolution	600 x 600 dpi
Fax	Optional
Power Source	220 - 240 V, 50/60 Hz
Print Speed	35 ppm
Connectivity	USB, Ethernet
Warm-up Time	24 seconds
Hard Disk Drive	Optional 320 GB
Supported Paper Weight	60-220 g/m²
Copy Speed	35 cpm
Functions	Print, Copy, Scan
Fax Speed	33.6 kbps
Network Connectivity	Ethernet