Attaching the Paper Feed Unit
• It is dangerous to handle the power cord plug with wet hands. Doing so could result in electric
shock.
• The machine weighs approximately 30 kg (67 lb.).
• When moving the machine, use the inset grips on both sides, and lift slowly in pairs. The machine
will break or cause injury if dropped.
• Lifting the paper feed unit carelessly or dropping may cause injury.
• Unplug the power cord from the wall outlet before you move the machine. While moving the
machine, take care that the power cord is not damaged under the machine. Failing to take these
precautions could result in fire or electric shock.
• Do not place the machine directly on the floor.
• When attaching multiple options, attach the paper feed unit first.
• To attach two paper feed units at the same time, first stack them one upon the other, and then
attach them as a single unit.
• Before turning on the power, remove the packaging material from the paper feed unit.
1. Check the contents of the package.
2. Turn the machine off and unplug the power cord.
3. Remove the packaging from the paper feed unit.
4. Lift the machine using the inset grips on both sides of the machine.
1. Getting Started
40
To Next Page
Loading...
Need help?
General
