Order of Option Installation
When installing multiple options, the following order is recommended:
1. Attach the Lower paper tray (250 sheets) and the Lower paper tray (500 sheets).
You can attach up to three paper feed units by any combination.
2. Attach the offline stapler.
3. Attach the Handset.
4. Install the interface board.
Install in the slot of the controller board.
Only one interface board can be installed.
5. Insert SD card.
Insert in the SD card slot of the controller board.
There are two slots for SD cards.
Each slot supports different types of SD cards.
If you want to use two or more SD cards that can be inserted in the same slot, contact your sales or
service representative.
Order of Option Installation
39
To Next Page
Loading...
Need help?
General
