Installing the Handset (mainly
North America)
Connecting the handset enables you to use the machine as a telephone and to easily switch the
reception mode when a telephone call arrives.
For details about switching the reception mode, see "Fax Reception Modes", Fax.
• Do not apply strong impact or force to the bracket, or it may be damaged. Maximum force
allowable is approx. 50N (approx. 5 kgf). (N = Newton, kgf = Kilogram force. 1 kgf = 9.8N.)
• When you fix the handset cradle to the handset bracket, do not screw it too tightly. Doing so may
damage the cradle or bracket.
• A ferrite core is attached to the handset cord to reduce noise. Do not remove the ferrite core.
Connecting the handset
1. Make sure you have all the following items.
1. Handset
2. Handset cradle
3. Screws (2)
4. Handset bracket
1. Getting Started
60
To Next Page
Loading...
Need help?
General
