Loading Paper into the Paper Bypass Location
Use the paper bypass location to copy onto paper sizes that cannot be loaded on the paper input
location.
• If the paper is curled, load it so that it curls facing downward.
• When loading paper that is longer than A1 (D) , place a clean cloth or sheet of paper behind the
machine in advance. If the edge of the paper touches the floor and get dirty, a malfunction might
occur.
1. Make sure that "Ready" appears on the screen.
2. When the paper roll is loaded, press down the rewind button on the right of the paper
input location for where the paper roll is loaded for more than one second.
After you release the button, the paper is rewound automatically.
If the paper roll is not loaded, proceed to step 3.
To Next Page
Loading...
Need help?
General