Panel Tone
The following table describes the meaning of the various beep patterns that the machine produces to
alert users about left originals and other machine conditions.
Beep pattern Meaning Causes
Single short beep Panel/screen input
accepted.
A control panel or screen key was
pressed.
Short, then long beep Panel/screen input rejected. An invalid key was pressed on the
control panel or screen, or the entered
password was incorrect.
Single long beep Job completed successfully. A Copier/Document Server Features
job has finished.
Two long beeps Machine has warmed up. When the power is turned on or the
machine exits Sleep mode, the
machine has fully warmed up and is
ready for use.
Five long beeps Soft alert An auto reset was performed through
the simple screen of the Copier/
Document Server function or the
Scanner function.
Five long beeps repeated
four times.
Soft alert Paper is empty.
Five short beeps repeated
five times.
Strong alert The machine requires user attention
because paper has jammed, the ink
needs replenishing, or other problems
have occurred.
• Users cannot mute the machine's beep alerts. When the machine beeps to alert users of a paper
jam or ink request, if the machine's covers are opened and closed repeatedly within a short space
of time, the beep alert might continue, even after normal status has resumed.
• You can select to enable or disable beep alerts. For details about Panel Key Sound, see "General
Features", Connecting the Machine/ System Settings .
9. Troubleshooting
152
To Next Page
Loading...
Need help?
General