52
English
User Settings
Lamp Settings
Use this option to view the lamp life status and congure the lamp
settings. Press the ► key to enter the sub menu and congure the
desired settings.
Lamp Hours Used (Normal): Display the projection time.
Lamp Hours Used in Eco mode or “Image Eco” mode “On” will
be converted to Lamp Hours Used in “Normal” mode.
Lamp Life Reminder: Choose this function to show or to hide
the warning message when the changing lamp message is
displayed. The message will appear 30 hours before suggested
replacement of lamp.
Lamp Power Mode: Set the brightness mode. Choose “Normal”
to increase the brightness or choose “ECO” to dim the projector
lamp which will lower power consumption and extend the
lamp life.
Image Eco: Choose “On” to dim the lamp power, depending
on the brightness level of images, and signicantly reduce the lamp
power consumption. The lamp life will be extended.
High Altitude
When “On” is selected, the fans will spin faster. Set High Altitude
mode to “On” when the projector is used over 2500ft (750m)
elevation.
When ambient
temperature is over
40°C in operating, the
projector will switch to
“ECO” automatically.
To Next Page
Loading...
Need help?
General
