64
English
LAN Control
Since no error will be reported even if any error is occurred in
sending a test mail.
Check if the test mail is arrived to destination mail box.
The body of the mail is "Email Test:xxx.xxx.xxx.xxx"
* "xxx.xxx.xxx.xxx" means IP address of the projector. (ex.
192.168.0.100)
Logout
Click Logout tab to logout from this projector control web site.
This page will appear for 2 seconds and then jump to login page.
Be sure Email
settings and SMTP
settings are correct.
Email test is
recommended after
alert setting is set.
Always set “Control
method” to “LAN”
in OSD menu in the
projector to detect
the error.
Default value of
Email setting is a
sample setting as
followings.
[To] user@mailserver.com
[Cc] cc@mailserver.com
[Subject] Project alert
[From] alert@mailserver.com
Only SMTP protocol
is supported.
N
o
t
e
To Next Page
Loading...
Need help?
General
