• The main power switch must only be turned on by personnel with sufficient knowledge about how
to use this machine.
1. Confirm that the power of the machine is off.
2. Insert the connector of the power cord into the power socket of the machine.
3. Insert the power cord plug into the wall outlet.
Power Source
• (mainly Europe and Asia)
AC220–240 V, 16 A, 50/60 Hz (These values are for one power cord only.)
• (mainly North America)
AC208–240 V, 16 A, 50/60 Hz (These values are for one power cord only.)
Be sure to connect the power cord to a power source as above.
(mainly Europe)
For users in Norway, this product is also designed for an IT power distribution system with phase-to-
phase voltage of 230 V.
Connecting the Cable
31
To Next Page
Loading...
Need help?
General